Semi-automatic Rotary Arm Stretch Film Machine

• Up to 50 loads per hour *

• 56”W x 56”L x 80”H (80” diag)

• Unlimited

• 130”W x 141½”L x 117½”H **

• 2,450 lbs.

• 120V/1/60 15A

• Allen Bradley Micrologix 1000 or 1200 PLC
• 24V control system
• Current overload protection
• NEMA 4⁄12 control cabinet
• Autoheight sensing photoeye
• Power on⁄off switch and indicator light
• Start⁄stop push button
• Large emergency stop (push pull type) on control panel
• Manual carriage up⁄down function
• Variable rotary arm speed (12 RPM) other speeds available
• Separate up and down carriage speeds
• Separate top and bottom wrap selectors (0-9)
• Reinforced wrap/manual rotation control
• Positive arm alignment controlled by proximity sensor
• Top cover pause switch (Splash-proof Program)
• Spiral up or spiral up⁄down switch
• Film force to load control
• Double brush dust tight slip ring
• Emergency stop sensor for arm path obstruction
• Panel can be located up to 10' from machine frame

• 20” NO-THREAD® Powered Pre-Stretch Carriage
• 1 HP AC motor with Allen Bradley variable frequency drive
• 50-300% pre-stretch ratio (preset to cust. spec, Std 200%)
• Electronic film tension control with analog sensor
• Film roping bar
• Lexan roller cover for operator safety
• Angled carriage to wrap approximately 2” from floor level

• 3⁄4 HP AC motor with variable frequency drive
• Two #50 carriage lifting chains enclosed in tower for safety
• Dual ½” CRS ways with UHMW-PE carriage glides
• Dual structural steel supporting boom
• Power track for efficient guiding of wires

Rotary Arm Drive:

• 25” Heavy duty Ring GEAR Bearing, with Pinion GEAR Drive
• 12 RPM variable speed
• ¾ HP AC motor with variable frequency drive
• Electronic soft start⁄stop
• Positive arm alignment controlled by proximity sensor
• Protection guard over the ring gear

• Free standing integrated leg design
• (4) 6” X 6” floor mounting legs
• Heavy duty structural steel construction
• Easy access to all components

• Wulftec recommends using heavy-duty expansion shields of 3/4" diameter thread size with a minimum anchor depth of 4" in concrete.

• The machine is provided with a manual including electro/mechanical schematics and drawings
• Trouble shooting guide
• Installation instructions

• 3-year unlimited cycle warranty
• 10-year warranty on 25” ring gear bearings
• 10-year warranty on structural frame
• Lifetime warranty on prestretch rollers' blue compound